-
Gesamte Inhalte
158 -
Benutzer seit
-
Letzter Besuch
-
Tagessiege
4
Inhaltstyp
Profile
Forum
Galerie
Beiträge erstellt von jean-louis
-
-
Personally, if I had to choose only one stock I would like to see in DS8 and meterware, it would be Vision3 50D.
Google translation:
Persönlich, wenn ich nur eine Aktien Ich möchte in DS8 und Meterware sehen, es wählen würde Vision3 50D sein.
Jean-Louis
- 1
-
Please excuse my English.
Here is my comment on this discussion.
One must be aware of the concept of tolerances.
Bolex in the H16 service manual specifies:
flange focal distance ± 0.02mm
groundglass distance ± 0.02mm
This is considered satisfactory enough for the manufacturer.
Any attempt to get 0.00 is futile as any difference is considered negligeable.
Jean-Louis
- 2
-
http://www.ebay.de/i...sd=191128261116
Looks like JK conversion with addition of 1:1 shaft and screw holes for MST motor. Jean-Louis
- 1
-
8mm cores did exist. I have seen them. I even had some 8mm sized split reels many years ago. Today, it would be very hard to find.
Jean-Louis
-
I may have one. I have to check my stock.
Jean-Louis
Unfortunately, no, I do not have for this model.
Jean-Louis
-
I may have one. I have to check my stock.
Jean-Louis
- 2
-
On the viewfinder tube, there is a sticker indicating "super8 conversion by JK Camera"
Sprockets are bigger than normal; check the teeth.
Spool spindles are square not round.
Jean-Louis
- 1
-
eBay # 251454985304 is a DS8 but expensive.
Jean-Louis
is a
-
ich lese hier immer wieder mit unbehagen, dass ds8 möglicher weise zu wenig verwendung findet, was wiederum die konfektion von filmmaterial in diesem format nicht mehr lohnenswert macht.
da ist mir die idee gekommen, dass ich eventuell meine ds8 webo so umbaue, dass sie mit super8-meterware gefüttert werden kann. das müsste eigentlich relativ einfach zu machen sein.
hat da jemand erfahrung?
lg
markus
I have been working on a project like this for Friedemann for the Bolex DS8 but alas I have so little time to finish the prototype.
Hopefully, soon, more time will be more available.
Jean-Louis
- 2
-
Simon:
Kannst du mir mal erklären, wie man bei C-Mount auf 17,52mm Auflagemass gekommen ist...?
Ich kann rechnen, soviel ich will, ich bringe dieses Mass in keinen direkten Zusammenhang mit dem Zoll bzw. Inchmass...
Der Gewindedurchmesser ist völlig logisch, aber eben, das Auflagemass...
*muss mich unbedingt in die letzten Geheimnisse von C-Mount einlesen... sonst erwischt mich der Mich noch mit offenem Hosenstall... *lach
The original specification for the C-mount in the American system is 0.690" which is 17.526mm.
Why this distance of 0.690" was chosen is a still a mystery to me.
Jean-Louis
- 1
-
Excellent reportage Friedemann! Danke!
JL
- 1
-
RAR! Beaulieu Superdrive SD8/60 Super8 Filmkassette
60m Kassette für Beaulieu 6008/7008/9008 200ft Super8
Jean-Louis
-
Apropos....
Gibt es hier im Forum noch aktive Nutzer der Elmo C300 mit dem DS8-Laufwerk bzw. ist jemanden einer bekannt?
I have one but I do not use it.
Jean-Louis
-
- 1
-
FFD of D-mount is 12.29mm.
JL
-
These CS-mount lenses could be used on Bolex H8 non-reflex cameras with specially modified turret.
Jean-Louis
-
Yes handle can be removed on the 2008 and the 4008.
However, on the 4008, switches must be relocated.
Underneath is a standard 1/4 inch tripod socket.
This socket is a little fragile however.
Jean-Louis
- 2
-
What camera were you using?
Are you sure it is irregular?
The flash seems to be exactly on the third and fourth frame at the beginning or end of a shot, I cannot tell from the content.
Jean-Louis
-
Das enorme Weitwinkel von 6,5mm bei einer 16mm-Kamera ist bei dem Angebot ja reizvoll:
http://www.ebay.de/i...9#ht_154wt_1037
Aber kann das funktionieren?
Benötigt eine Reflex-Kamera nicht die speziell dafür gerechneten Kern-Objektive?
Und worum handelt es sich wohl beim zweiten, auf den Bildern extrem mickrig aussehenden Objektiv
(oder ist das 6,5er so riesig) ?
This is 8mm camera, not 16mm. Lenses are D-mount, not C-mount. 6.5mm is an average wide angle for 8mm format.
Jean-Louis
-
For the technical part of filmmaking: Brian de Palma's Blow Out.
JL
-
Reinhold,
I looked at one old projector I have and the bearings are also beginning to deteriorate.
On the week-end I will look at some others.
Jean-Louis
-
I am pretty sure I have this. I will look at home this evening.
Jean-Louis
-
I have a junk unit like this. I can probably send you the parts you need if you provide photos.
Jean-Louis
-
This seller must be "übergeschnappt"!
Jean-Louis
- 1
Pathe Webo Drahtauslöser
in Schmalfilm
Geschrieben
Each manufacturer has their own standards.
Bolex H16 cable release thread is M3x0.5mm.
Beaulieu R16 & super8 is M3.5x0.6mm.
Looks like Pathe is another one again.
Jean-Louis
Google Translate:
Jeder Hersteller hat eigene Standards.
Bolex H16 Gewinde für Drahtauslöser ist M3x0.5mm.
Beaulieu R16 & Super8 ist M3.5x0.6mm.
Sieht aus wie Pathe ist ein anderes wieder.