MarinBNM

All processors are played on it's nominal level, problem is output reference on some processors, I have sound card with balanced inputs, and if processor has unbal output normaly level will be lower.

How do you know that isn't CP650?

HI friend! Yea, sure don't listen to laptop it will sound awfull :D Looking forward to hear you're opinion! Also, real test would be to record all chanells because this is Lt Rt endoced so it a bit mess up :D

We did discussed this many times, but as I do have big tehnical background in pro-audio, and blind test of equipment is always welcomed there, so I decided to make one on film area. I had some time and did recorded some trailler, projector is same, as well reader and so, on all recordings. There are four cinema processors used and calibrated as it should be, signal which is recorded is Stereo Lt and Rt with SR. Now I want you to listen and told which one you think is best SR sounding. I know this isn't real test as real would be to hear complete unit, but it's something. This are four files, just download it and listen, and normally share you're opinion! https://files.me.com/biela.dortmund/8e34yy

Sorry but I don't have photo, rectifier was troven away, only I did take transformer and regulation transformer. Do you have any schematic or data of klangfilm rectifiers?

Hello, and sorry, but better I write in english, than in bad german To get on point, I had some old Klangfilm rectifier, black box, and only marking on it was that is Klangfilm. There is main transformer and regulator (primary) in it, I did take them out as they are in good condition, now I want to use it, will add 3ph greatz and so, only don't know would this transformer will take up to 1600W lamp? There is plate on transformer, it saysa: typ Wi091, and on regulator choke: typ DO 16a. If anybody knows anything about this, please let me know!!

Sorry, but don't know german well to write on, I hope english won't be bad :D So, you're saying when you play optical that only one channel is there, and when play AUX true DA20 all channels are okay? When you going to set level with test film, does also on setup screen only one channel working, so only one bar is up? If so, than probably something is wrong with PEC input card, first it can be NE5532, there are two of them on input, if you are skilled you could try to change them, but be careful as it's 3side PCB....I have one situation where that IC was dead....

Also I hear from one source that they try to import them to France over some company, but that wasn't sucsesfull. Also, from friend's in Poland, they told me that last Prexer machine was AP624, maded around 1992-1993, maded about four pairs only. That one have automatic turret, stereo reverse scan with IR led, and because of that posibility to operate with automation.....but I newer saw one or get photo of it, also one more fact, they maded prototype of 70mm machine, but newer get it in serial production. As Stefan mentioned, closer Ernie VIIB copy was Iskra projectors, which were built more better than any prexer, they used high-class ball bearings from SKF and soem from Japan, high class materials and material process. Iskra also can use high power xenon lamp because it has water cooled gates, so film won't get hot and it won't bend over higher temperature what is important for focus, earlier prexer had water cooling, but with 0% effect, only some plate behind film gate were cooled, when they figure out later that it haven't any effect, they just placed piece of metal plate there. On ISKRA, in Pula they used 4000W lamps on KN-3 for screening in old arena where film festival is showing. Not to mention how more better and easyer to maintence ISKRA electronics is, than some prexer with poor electronics.

Yea, some photos should be good to see, and also what models are you talking about? About Prexer......is just cheap maded machine, ernemann copy, but with central shaft transmission and "kegel blende" (shutter) like on Bauer. I do service lot of that machines, electronic sucks, but when they are tweeked good they can run nice, I have pair AP61 installed back in 1973 in my father's booth, they have more stabile picture than VIC5 in multiplex I see here. Also I do have newer model from 1984 which have suprisily good sound optics that can reach 16KHz with bit HF on processor. But they do have some child problems like oil leaking (if you remake all sealing it won't leak, but from factory..) Also replacing of ball bearing on sounhead is good to do.

It's better to use that lamp as heater :) I do have some NARVA 3KW bulb from some stage reflectors.

On film-tech are only spare parts catalogue, I did receive mail from Cinemeccanica, but they put wrong schematic, I hope they will send wright one.

HI! I have two VIC 5's with X2000H lamp houses dating about 1977-1984 or so, so I would need schematic of machine and if possible schematic of interconnection to it like mains supply, changeover and so. I could made it by myself, but why to mess with machine if everything is there allready. tnx!

Hi all again! Well...again problems with this crap.....I have rectifier which I did rewire as Stefan did pointed me.....and with mine 900W bulb at home it works perfectly, it ignite every time!! And when I connect it to P86 which have 500W lamp and AS16040 igniter it don't work good...it you want to ignite lamp first we must put switch for higher current and when lamp strikes then put it to nominal waleu )but with 900W at home that isn't problem)...I did try to replace igniter capacitors, sparker, lamp.....but always the same.....another strange thing is that when you strike it the lamp momentaly lights (not light spark because of ignition, but real light) but only for a quart of second and then it gone off and you see voltage drop down what is normaly because lamp is starting and booster capacitor is descharging. So if maybe someone have more idea about this problem...?

I did do complete diagnose today, problem was in DAC CS4328 Vref voltage, on others normally is 3,6V...on "noisy" one it was only 1,4V due failure of capacitors on Vref (pin 28 of DAC). Now voltage is back to 3,6V and is working fine.

HI, problems is only in output, I normaly try to switch channel on amp but same....also there aren't any cable issues here. One thing more is to try replace e-potmeter.

Hello, sorry I'm writting on english, but mine german is so bad. Here is the problem: One night I did noticed strange noise on L channel, some noise....but sound on L was okay, and during louder parts in movie you can't hear noise because isn't high in level. Than I did go to investigate what is about....everything was normal, also I try to use Lc output but same, even I changed output driver SSM and TL072 before it but same. but I noticed that on AIN (8ch external input card) L and Lc level shows -600dB, where else are -90dB normal....i did unplug card and than noise is gone....I was think is because of bad AIN card....but after some days noise is here again, symptoms same as first time, but noise is quite low now...and noticale only during silence parts..... So if someone have any ideas, also I did suspect on AOUT board but that -600dB don't make sense in AIN calibration menu, -600dB also shows on all channel when AIN board isn't in it. thanks!!

Hello!! I did some repairs to one KN-17 pair and one KN-13, and I do have amplifier schematic, don't know type by mind, but pass me you're mail and I can send you that schematics I have.

Where did you find taht price...I know that they have some long delivery time?

Yes, this was problem, I figured out also because when I saw sparking garp in lamphouse where bulb working I did noticed small distance on gapper, so I did even replace gapper on Irem because original is noisy :lol: and is bit melted.

I'm using this igniter with 500W horizontal bulb, and I have problems for hard striking lamp. Rectifier has 120V open voltage, and when I connect it to 900W lamp house on other projector is working without problems, so rectifier is OK. But on this Prevost with Irem igniter it strikes about when i try 10 times or more.....can be problems because this igniter is for bigger bulb (is mentioned up to 160A) or may bee because high voltage is coming to + (Anode) of bulb?? On this machine is mentioned to be a AS3040 small igniter, but I can't find original, but this aslo fits in it.

I also wont to do this for portable machine.....is anyone concidering hysterese motors from MEO5?

i did entered random pass......so accidentally i entered 00001 end that was :lol:

Yea, now I unsolder battery again and put it out......so I've gonna see what is gonna happen when I get home! Because battery serves for keeping memory & presets? Are there any jumper pin on CPU board for reset???

When I try to enter config menu in DCP-1000 and enter default password 00000 in says "Invalid Password"...ok I don't know it. But how to restore it? I try to put out lithium battery for a two minuts and then I put it back again, but password is still here? Also When I try to conect DCP thrue PC is says that PORT can't be opened..strange because I use COM1&2 on PC without problems, and OS are WINXP.....may this be problem? Marin

Is this that "original" belt? I found that in meopta.